Skip to main content
  1. Home
  2. Space
  3. News

Hubble turns on one instrument, others remain in safe mode

By

Engineers at NASA are continuing work to fix the troubled Hubble Space Telescope, which is experiencing problems for the second time this year.

The problem began on October 25, when the science instruments automatically switched to safe mode as they are programmed to do when an issue occurs. This puts the instruments into a basic operating mode in which they don’t collect any science data and ensures that the instruments aren’t damaged by any faulty commands. The issue seems to be a problem with data synchronization.

Hubble Space Telescope in orbit.
Most of the instruments on the Hubble Space Telescope remain in safe mode following a synchronization issue. NASA

The first step to gathering more data about the problem was for the team to turn on an old and unused instrument, Near Infrared Camera and Multi Object Spectrometer (NICMOS) instrument. This instrument hasn’t been used in 11 years as it has been superseded by the Wide Field Camera 3, so the team could use NICMOS to collect information on the problem without risking the active instruments.

Recommended Videos

Next, the engineers moved on to turning back on a key Hubble instrument called the Advanced Camera for Surveys, which was recovered on November 7. This step was successful, allowing the engineers to learn more about what the problem is with the synchronization issue.

Related

“The Hubble team successfully recovered the Advanced Camera for Surveys instrument Nov. 7,” NASA wrote in an update. “The instrument has started taking science observations once again. Hubble’s other instruments remain in safe mode while NASA continues investigating the lost synchronization messages first detected October 23. The camera was selected as the first instrument to recover as it faces the fewest complications should a lost message occur. ”

The good news is that this part of the recovery process seems to have gone well, though engineers are very careful when turning on and testing systems as it would be extremely difficult to get an in-person mission to fix Hubble if anything went seriously wrong with the telescope. The engineers thus work remotely and very carefully to try to anticipate any potential issues.

“Over the past week, the mission team has continued investigating the root cause of the synchronization issues and has seen no additional problems,” NASA wrote. “The team will continue looking into possible short-term solutions this week and develop estimates for implementation. Once this occurs, the team will discuss returning the other instruments to operational status and resuming their science observations.”

Editors’ Recommendations

Topics
Georgina Torbet
Georgina Torbet
Space Writer
Georgina is the Digital Trends space writer, covering human space exploration, planetary science, and cosmology. She…
This one instrument has surveyed 2 million objects to understand dark energy
The Dark Energy Spectroscopic Instrument (DESI) making observations in the night sky on the Nicholas U. Mayall 4-meter Telescope at Kitt Peak National Observatory in Arizona.

The vastness of the universe is hard to comprehend, let alone map, but a cosmological project from the National Science Foundation's NOIRLab aims to do just that. The Dark Energy Spectroscopic Instrument (DESI) is designed to create a 3D map of millions of astronomical objects, and an early release of data from the project combines the thousands of exposures taken by the instrument during its validation phase in 2020 and 2021. It contains nearly 2 million objects.

The video below shows part of the survey validation data, with detailed portions of the sky shown in 20 different directions. Each "beam" of light is one part of the data, showing objects like stars, galaxies, and quasars. There are over 700,000 objects in this 3D map, and as impressive as that is, this represents just 1% of the total volume that will be mapped out in the DESI survey.

Read more
Hubble image of the week shows an unusual jellyfish galaxy
The jellyfish galaxy JO206 trails across this image from the NASA/ESA Hubble Space Telescope, showcasing a colorful star-forming disk surrounded by a pale, luminous cloud of dust. A handful of foreground bright stars with crisscross diffraction spikes stands out against an inky black backdrop at the bottom of the image. JO206 lies over 700 million light-years from Earth in the constellation Aquarius.

This week's image from the Hubble Space Telescope shows an unusual type of galaxy named for its aquatic look-alike: a jellyfish.

The jellyfish galaxy JO206 is shown below in an image taken using Hubble's Wide Field Camera 3 instrument. Located 700 million light-years away, in the constellation of Aquarius, this image of the galaxy shows both the bright center of the galaxy and its long tendrils reaching out toward the bottom right. It is these tendrils that give jellyfish galaxies their names, and they are formed through a process called ram pressure stripping.

Read more
Hubble scientists create tool for erasing satellite trails from images
This image captures the streak of an Earth-orbiting artificial satellite crossing Hubble's field of view during an observation of "The Mice" interacting galaxies (NGC 4676). A typical satellite trail is very thin and will affect less than 0.5% of a single Hubble exposure. Though in this case the satellite overlaps a portion of the target galaxy, the observation quality is not affected. That's because multiple exposures are taken of the same target. And the satellite trail is not in other frames. Developers at the Space Telescope Science Institute in Baltimore, Maryland, have software that identifies the bad pixels from the satellite photobombing, the extent to which they affect the image, and then flags them. When flagged, scientists can recover the full field of view. Even as the number of satellites increases over the decade, these tools for cleaning the images will still be applicable.

With ever-increasing numbers of satellites in the sky, astronomers have repeatedly expressed worry over how these satellites could impact scientific research. Earlier this year, a study of Hubble Space Telescope observations showed how some images were being ruined by streaks of light coming from satellites -- and while only a small percentage of Hubble images were affected, the authors raised concerns that with the projected number of satellites set to explode in the next decade, the problem could become serious.

Now, astronomers at the Space Telescope Science Institute (STScI), which runs Hubble, have come up with a tool to deal with satellite streaks in Hubble images. "We developed a new tool to identify satellite trails that is an improvement over the previous satellite software because it is much more sensitive. So we think it will be better for identifying and removing satellite trails in Hubble images," said Dave Stark of STScI in a statement.

Read more