Three of James Webb’s four instruments are now aligned

By Georgina Torbet April 2, 2022

The long process of getting the James Webb Space Telescope ready to begin collecting science data continues, and the Webb team has met another goal with the alignment of three out of its four instruments. The alignment process is a set of careful very small adjustments to each instrument to make sure they are in exactly the right location to receive light from the telescope’s large primary mirror. A few weeks ago the telescope’s mirrors were aligned with its main camera, called NIRCam, and now the telescope’s other instruments are being similarly adjusted.

Webb’s three near-infrared instruments (the Near-Infrared Slitless Spectrograph or NIRISS, the Near-Infrared Spectrometer or NIRSpec, and the Near-Infrared Camera or NIRCam) and its guidance sensor (the Fine Guidance Sensor or FGS) are now all aligned to its mirrors, leaving just the one mid-infrared instrument to go. The mid-infrared instrument (MIRI) takes longer to align because it uses a different type of sensor, which have to be cooled to an extremely low temperature of just 7 degrees kelvin. MIRI is still in the process of being cooled down to its operating temperature, and once it reaches this milestone then it too can be aligned.

Recommended Videos

The team had planned to make adjustments to the telescope’s secondary mirror — a smaller round mirror on the end of a boom arm — during the alignment process for the first three instruments, called phase six. However, it turned out that their alignments were so accurate that this wasn’t necessary, so they will wait until MIRI is fully cooled before making any final tweaks to the secondary mirror, in phase seven.

“As a general rule, the commissioning process starts with coarse corrections and then moves into fine corrections. The early secondary mirror coarse corrections, however, were so successful that the fine corrections in the first iteration of Phase Six were unnecessary,” said Chanda Walker, Webb wavefront sensing and control scientist at Ball Aerospace, in a NASA blog post. “This accomplishment was due to many years of planning and great teamwork among the wavefront sensing team.”

Once MIRI is cooled and all four instruments are aligned, there will be a second multi-instrument alignment phase to make any final small tweaks or adjustments. With alignment complete, the team will be able to move on to calibrating the instruments, getting them ready to begin science operations this summer.

Topics

Georgina Torbet

Space Writer

Georgina is the Digital Trends space writer, covering human space exploration, planetary science, and cosmology. She…

Space

One galaxy, two views: see a comparison of images from Hubble and Webb

The peculiar galaxy NGC 3256 takes centre stage in this image from the NASA/ESA Hubble Space Telescope. This distorted galaxy is the wreckage of a head-on collision between two spiral galaxies which likely occurred 500 million years ago, and it is studded with clumps of young stars which were formed as gas and dust from the two galaxies collided.

It might not seem obvious why astronomers need multiple different powerful space telescopes. Surely a more powerful telescope is better than a less powerful one? So why are there multiple different telescopes in orbit, either around Earth or around the sun?

The answer is to do with two main factors. One is the telescope's field of view, meaning how much of the sky it looks at. Some telescopes are useful for looking at large areas of the sky in less detail, working as survey telescopes to identify objects for further research or to look at the universe on a large scale -- like the recently launched Euclid mission. While others, like the Hubble Space Telescope, look at small areas of the sky in great detail, which is useful for studying particular objects.

Space

James Webb spots the most distant active supermassive black hole ever discovered

Crop of Webb's CEERS Survey image.

As well as observing specific objects like distant galaxies and planets here in our solar system, the James Webb Space Telescope is also being used to perform wide-scale surveys of parts of the sky. These surveys observe large chunks of the sky to identify important targets like very distant, very early galaxies, as well as observe intriguing objects like black holes. And one such survey has recently identified the most distant active supermassive black hole seen so far.

While a typical black hole might have a mass up to around 10 times that of the sun, supermassive black holes are much more massive, with a mass that can be millions or even billions of times the mass of the sun. These monsters are found at the heart of galaxies and are thought to play important roles in the formation and merging of galaxies.

Space

Saturn as you’ve never seen it before, captured by Webb telescope

Saturn captured by the James Webb Space Telescope

NASA has shared a gorgeous image of Saturn captured recently by the James Webb Space Telescope (JWST).

Webb’s first near-infrared observations of the second largest planet in our solar system also show several of Saturn’s moons: Dione, Enceladus, and Tethys.