Skip to main content

Just For The Tech Of It: Genetically modified maggots, 3D printing in space, and more

When you think of modern medicine, maggots probably aren’t the first thing that comes to mind. But if a team of bioengineers from North Carolina State University has its way, that might soon change. The team has developed a new technique that uses genetically modified maggots to heal wounds faster than ever before.

It sounds crazy, but up until recently it actually wasn’t unusual for people to clean wounds by applying fly larvae — otherwise known as maggots — to the affected area. These little grubs devour dead flesh and leave healthy tissue intact, and also excrete antimicrobial juices along the way — which makes them a gross but undeniably effective way to treat large open wounds. To give this technique a modern update, scientists at NC state took green bottle fly larvae and tweaked their genetic code so that instead of excreting an antimicrobial factor, the maggots produced a growth factor that accelerates the healing process.

Recommended Videos

Earlier this week, NASA launched a rocket into orbit as part of a resupply mission for the International Space Station. This happens fairly often, so it’s not always a big deal, but on this particular launch, the rocket was carrying something special — a 3D printer that can fabricate objects in zero gravity.

Now, truth be told, this isn’t the first 3D printer we’ve ever sent to the ISS, but this new and improved version is much more capable than the one we sent up in 2014, and it’s going to completely change how we send things to space. Now that the ISS crew has this printer installed, NASA and other space agencies won’t have to spend millions of dollars to launch specific parts and tools up to the space station. Moving forward, we can just send the ISS a steady supply of printing material, and then whenever an astronaut needs a wrench or a fastener or a knob or something, NASA can just beam the design file up to the printer can fabricate it right there on board.

And finally, even if you’ve been living under a rock for the past two years, by now you’ve probably heard of this revolutionary new gene-editing technique called CRISPR/Cas9. Normally, when you hear about it, it’s described as a tool for eliminating genetic diseases, or maybe splicing together bits of DNA from two different places. But this week, scientists from Temple University have taken it in a completely new route — they actually used CRISPR to edit HIV genes out of human immune cells.

This is huge news, because retroviruses, like HIV, are super difficult to treat. Unlike regular viruses, retroviruses insert copies of their genomes into host cells in order to replicate — which means that as soon as you stop taking antiretroviral HIV drugs, the virus reasserts itself and weakens your immune system even further, triggering the onset of AIDS. That’s what makes this new CRISPR treatment so revolutionary. Not only does this new technique remove the viral DNA, it actually removes it permanently, and prevents the HIV from reinfecting the host.

Drew Prindle
Former Digital Trends Contributor
Drew Prindle is an award-winning writer, editor, and storyteller who currently serves as Senior Features Editor for Digital…
Juiced Bikes offers 20% off on all e-bikes amid signs of bankruptcy
Juiced Bikes Scrambler ebike

A “20% off sitewide” banner on top of a company’s website should normally be cause for glee among customers. Except if you’re a fan of that company’s products and its executives remain silent amid mounting signs that said company might be on the brink of bankruptcy.That’s what’s happening with Juiced Bikes, the San Diego-based maker of e-bikes.According to numerous customer reports, Juiced Bikes has completely stopped responding to customer inquiries for some time, while its website is out of stock on all products. There are also numerous testimonies of layoffs at the company.Even more worrying signs are also piling up: The company’s assets, including its existing inventory of products, is appearing as listed for sale on an auction website used by companies that go out of business.In addition, a court case has been filed in New York against parent company Juiced Inc. and Juiced Bike founder Tora Harris, according to Trellis, a state trial court legal research platform.Founded in 2009 by Harris, a U.S. high-jump Olympian, Juiced Bikes was one of the early pioneers of the direct-to-consumer e-bike brands in the U.S. market.The company’s e-bikes developed a loyal fandom through the years. Last year, Digital Trends named the Juiced Bikes Scorpion X2 as the best moped-style e-bike for 2023, citing its versatility, rich feature set, and performance.The company has so far stayed silent amid all the reports. But should its bankruptcy be confirmed, it could legitimately be attributed to the post-pandemic whiplash experienced by the e-bike industry over the past few years. The Covid-19 pandemic had led to a huge spike in demand for e-bikes just as supply chains became heavily constrained. This led to a ramp-up of e-bike production to match the high demand. But when consumer demand dropped after the pandemic, e-bike makers were left with large stock surpluses.The good news is that the downturn phase might soon be over just as the industry is experiencing a wave of mergers and acquisitions, according to a report by Houlihan Lokey.This may mean that even if Juiced Bikes is indeed going under, the brand and its products might find a buyer and show up again on streets and trails.

Read more
Volkswagen plans 8 new affordable EVs by 2027, report says
volkswagen affordable evs 2027 id 2all

Back in the early 1970s, when soaring oil prices stifled consumer demand for gas-powered vehicles, Volkswagen took a bet on a battery system that would power its first-ever electric concept vehicle, the Elektro Bus.
Now that the German automaker is facing a huge slump in sales in Europe and China, it’s again turning to affordable electric vehicles to save the day.Volkswagen brand chief Thomas Schaefer told German media that the company plans to bring eight new affordable EVs to market by 2027."We have to produce our vehicles profitably and put them on the road at affordable prices," he is quoted as saying.
One of the models will be the ID.2all hatchback, the development of which is currently being expedited to 36 months from its previous 50-month schedule. Last year, VW unveiled the ID.2all concept, promising to give it a price tag of under 25,000 euros ($27,000) for its planned release in 2025.VW CEO Larry Blume has also hinted at a sub-$22,000 EV to be released after 2025.It’s unclear which models would reach U.S. shores. Last year, VW America said it planned to release an under-$35,000 EV in the U.S. by 2027.The price of batteries is one of the main hurdles to reduced EV’s production costs and lower sale prices. VW is developing its own unified battery cell in several European plants, as well as one plant in Ontario, Canada.But in order for would-be U.S. buyers to obtain the Inflation Reduction Act's $7,500 tax credit on the purchase of an EV, the vehicle and its components, including the battery, must be produced at least in part domestically.VW already has a plant in Chattanooga, Tennesse, and is planning a new plant in South Carolina. But it’s unclear whether its new unified battery cells would be built or assembled there.

Read more
Nissan launches charging network, gives Ariya access to Tesla SuperChargers
nissan charging ariya superchargers at station

Nissan just launched a charging network that gives owners of its EVs access to 90,000 charging stations on the Electrify America, Shell Recharge, ChargePoint and EVgo networks, all via the MyNissan app.It doesn’t stop there: Later this year, Nissan Ariya vehicles will be getting a North American Charging Standard (NACS) adapter, also known as the Tesla plug. And in 2025, Nissan will be offering electric vehicles (EVs) with a NACS port, giving access to Tesla’s SuperCharger network in the U.S. and Canada.Starting in November, Nissan EV drivers can use their MyNissan app to find charging stations, see charger availability in real time, and pay for charging with a payment method set up in the app.The Nissan Leaf, however, won’t have access to the functionality since the EV’s charging connector is not compatible. Leaf owners can still find charging stations through the NissanConnectEV and Services app.Meanwhile, the Nissan Ariya, and most EVs sold in the U.S., have a Combined Charging System Combo 1 (CCS1) port, which allows access to the Tesla SuperCharger network via an adapter.Nissan is joining the ever-growing list of automakers to adopt NACS. With adapters, EVs made by General Motors, Ford, Rivian, Honda and Volvo can already access the SuperCharger network. Kia, Hyundai, Toyota, BMW, Volkswagen, and Jaguar have also signed agreements to allow access in 2025.
Nissan has not revealed whether the adapter for the Ariya will be free or come at a cost. Some companies, such as Ford, Rivian and Kia, have provided adapters for free.
With its new Nissan Energy Charge Network and access to NACS, Nissan is pretty much covering all the bases for its EV drivers in need of charging up. ChargePoint has the largest EV charging network in the U.S., with over 38,500 stations and 70,000 charging ports at the end of July. Tesla's charging network is the second largest, though not all of its charging stations are part of the SuperCharger network.

Read more