Skip to main content

Circuit Cubes teaches kids basics of circuitry with Lego blocks, light-up LEDs

Tactile learning is one of the most powerful ways to teach a kid. Kids who touch and feel their way through a difficult subject tend to internalize — and articulate — the concepts better. And for a subject as abstract as circuitry, there’s perhaps no better way to convey the basics than with Circuit Cubes, snap-on modules that kids can use to build the machines of their dreams.

There’s a motor cube that drives a gear shaft at 1,000 RMPs, an LED module that lights up brightly when attached to a completed circuit, and a rechargeable battery module that last up to one hour of active play (and three days on standby).

Recommended Videos

It’s the debut effort of longtime educators Nate MacDonald and John Schuster, who spent years developing lessons with an interdisciplinary basis in STEM — science, technology, engineering, and mathematics. MacDonald co-founded Sonoma State University’s Maker Certificate program and advised the White Hill Robotics Club, an elective at White Hill Middle School in Fairfax, California.

Schuster, the former IT director at White Hill Middle School, teamed up with MacDonald to found Tenka Labs, a startup with a mission to design toys that are “as fun to play with and build with, but that along the way, enable kids to learn about basic circuitry.”

Legos + circuits = fun

Intuitiveness was a core consideration in the Circuit Cubes’ design. Each module measures two standard Lego bricks high and four Lego bricks wide and pairs via two silver terminals on the modules’ front.

“We wanted the form factor to be approachable, but small enough to build structures with,” Schuster said, “and we wanted the components to be visible so that kids could experiment.”

To that point, the base of the motor and LED module are made of a translucent material, and motor lines on the bottom show the flow of electricity. That’s to demonstrate the concept of polarity and resistance, Schuster said. Attaching a motor module directly to a battery module will cause it to spin quickly, but adding an LED module to the circuit will slow it down. Swapping the negative and positive contacts, on the other hand, will cause it to reverse its direction.

“It teaches kids basic technology literacy,” he said. “It’s not about the blocks themselves but what you can make with them.” It’s not so complicated that kids couldn’t figure out how to build things on their own, Schuster was quick to point out. “The minute kids have to go ask their parents for help, they’ve lost ownership of it,” he said. As a result, the system is simple enough that kids can construct a simple gadget without much thought. “They can build a car in tens seconds or less.”

Different designs for all interests

Circuit Cubes ship in one of three $60 kits differentiated by pack-ins. The Whacky Wheels kit ships with building instructions for cars, trucks, bikes, bridges, and Ferris wheels. Bright Lights boasts templates for telescoping tools, light sabers, and superhero GOBO. The Smart Art kit comes with felt tip pens for drawing robots that produce swirling designs on canvases.

The kits don’t prescribe designs, though. “The core ones allow you to do so many things,” John said. “It’s a design driven by kids. Their inspiration is what it’s all about.”

“It’s a design driven by kids. Their inspiration is what it’s all about.”

Schuster showed off a few models early Circuit Cube testers put together. There was a cut-out butterfly that flapped its wings with the help of a motor module, a battery module, and a few moving Lego “limbs.” An AT-AT_inspired walker moved lumbered forward, and another simulated rotating lights that’d be right at home on top of a police siren.

One of the most inventive creations was a toy rabbit that’d been stuffed with a Lego “skeleton” comprising a “spine,” a battery module, and a motor module that caused it to nod its head as though it was acknowledging Schuster’s words. “It’s a bit creepy,” he said. “But that’s the beauty. The Circuit Cubes allow almost endless creativity. ”

Getting kids into tech

The launch of Circuit Cubes comes as the U.S. faces record growth in demand — 17 percent by 2024 — for STEM jobs. But there’s a shortage of qualified candidates. The country ranks 27th in math compared to the rest of the world, and only 36 percent of the country’s high school graduates are ready to take college-level science courses.

“Kids need to be completely engaged first if they’re going to really absorb complex concepts on how things work,” Schuster said. He and MacDonald are developing a classroom curriculum for the Circuit Cube kits that are launching today, and are building an online community that’ll host “hundreds” of projects that kids will be able to “get ideas from.”

Kyle Wiggers/Digital Trends

“When kids are having fun, they’re at their maximum learning curve to develop the skills needed to start building and designing things, and to go on their own adventure,” he said.

Schuster and MacDonald are focusing on the launch of the first-generation Circuit Cubes, but they’re already hard at work on a future iteration that will allow kids to control modules with a smartphone or tablet via Bluetooth.

“It’s like the cheese on the broccoli,” said Schuster. “It’s forgetting about what the Circuit Cubes can do and creating some cool adventure.”

Kyle Wiggers
Former Digital Trends Contributor
Kyle Wiggers is a writer, Web designer, and podcaster with an acute interest in all things tech. When not reviewing gadgets…
Juiced Bikes offers 20% off on all e-bikes amid signs of bankruptcy
Juiced Bikes Scrambler ebike

A “20% off sitewide” banner on top of a company’s website should normally be cause for glee among customers. Except if you’re a fan of that company’s products and its executives remain silent amid mounting signs that said company might be on the brink of bankruptcy.That’s what’s happening with Juiced Bikes, the San Diego-based maker of e-bikes.According to numerous customer reports, Juiced Bikes has completely stopped responding to customer inquiries for some time, while its website is out of stock on all products. There are also numerous testimonies of layoffs at the company.Even more worrying signs are also piling up: The company’s assets, including its existing inventory of products, is appearing as listed for sale on an auction website used by companies that go out of business.In addition, a court case has been filed in New York against parent company Juiced Inc. and Juiced Bike founder Tora Harris, according to Trellis, a state trial court legal research platform.Founded in 2009 by Harris, a U.S. high-jump Olympian, Juiced Bikes was one of the early pioneers of the direct-to-consumer e-bike brands in the U.S. market.The company’s e-bikes developed a loyal fandom through the years. Last year, Digital Trends named the Juiced Bikes Scorpion X2 as the best moped-style e-bike for 2023, citing its versatility, rich feature set, and performance.The company has so far stayed silent amid all the reports. But should its bankruptcy be confirmed, it could legitimately be attributed to the post-pandemic whiplash experienced by the e-bike industry over the past few years. The Covid-19 pandemic had led to a huge spike in demand for e-bikes just as supply chains became heavily constrained. This led to a ramp-up of e-bike production to match the high demand. But when consumer demand dropped after the pandemic, e-bike makers were left with large stock surpluses.The good news is that the downturn phase might soon be over just as the industry is experiencing a wave of mergers and acquisitions, according to a report by Houlihan Lokey.This may mean that even if Juiced Bikes is indeed going under, the brand and its products might find a buyer and show up again on streets and trails.

Read more
Volkswagen plans 8 new affordable EVs by 2027, report says
volkswagen affordable evs 2027 id 2all

Back in the early 1970s, when soaring oil prices stifled consumer demand for gas-powered vehicles, Volkswagen took a bet on a battery system that would power its first-ever electric concept vehicle, the Elektro Bus.
Now that the German automaker is facing a huge slump in sales in Europe and China, it’s again turning to affordable electric vehicles to save the day.Volkswagen brand chief Thomas Schaefer told German media that the company plans to bring eight new affordable EVs to market by 2027."We have to produce our vehicles profitably and put them on the road at affordable prices," he is quoted as saying.
One of the models will be the ID.2all hatchback, the development of which is currently being expedited to 36 months from its previous 50-month schedule. Last year, VW unveiled the ID.2all concept, promising to give it a price tag of under 25,000 euros ($27,000) for its planned release in 2025.VW CEO Larry Blume has also hinted at a sub-$22,000 EV to be released after 2025.It’s unclear which models would reach U.S. shores. Last year, VW America said it planned to release an under-$35,000 EV in the U.S. by 2027.The price of batteries is one of the main hurdles to reduced EV’s production costs and lower sale prices. VW is developing its own unified battery cell in several European plants, as well as one plant in Ontario, Canada.But in order for would-be U.S. buyers to obtain the Inflation Reduction Act's $7,500 tax credit on the purchase of an EV, the vehicle and its components, including the battery, must be produced at least in part domestically.VW already has a plant in Chattanooga, Tennesse, and is planning a new plant in South Carolina. But it’s unclear whether its new unified battery cells would be built or assembled there.

Read more
Nissan launches charging network, gives Ariya access to Tesla SuperChargers
nissan charging ariya superchargers at station

Nissan just launched a charging network that gives owners of its EVs access to 90,000 charging stations on the Electrify America, Shell Recharge, ChargePoint and EVgo networks, all via the MyNissan app.It doesn’t stop there: Later this year, Nissan Ariya vehicles will be getting a North American Charging Standard (NACS) adapter, also known as the Tesla plug. And in 2025, Nissan will be offering electric vehicles (EVs) with a NACS port, giving access to Tesla’s SuperCharger network in the U.S. and Canada.Starting in November, Nissan EV drivers can use their MyNissan app to find charging stations, see charger availability in real time, and pay for charging with a payment method set up in the app.The Nissan Leaf, however, won’t have access to the functionality since the EV’s charging connector is not compatible. Leaf owners can still find charging stations through the NissanConnectEV and Services app.Meanwhile, the Nissan Ariya, and most EVs sold in the U.S., have a Combined Charging System Combo 1 (CCS1) port, which allows access to the Tesla SuperCharger network via an adapter.Nissan is joining the ever-growing list of automakers to adopt NACS. With adapters, EVs made by General Motors, Ford, Rivian, Honda and Volvo can already access the SuperCharger network. Kia, Hyundai, Toyota, BMW, Volkswagen, and Jaguar have also signed agreements to allow access in 2025.
Nissan has not revealed whether the adapter for the Ariya will be free or come at a cost. Some companies, such as Ford, Rivian and Kia, have provided adapters for free.
With its new Nissan Energy Charge Network and access to NACS, Nissan is pretty much covering all the bases for its EV drivers in need of charging up. ChargePoint has the largest EV charging network in the U.S., with over 38,500 stations and 70,000 charging ports at the end of July. Tesla's charging network is the second largest, though not all of its charging stations are part of the SuperCharger network.

Read more