NASA buys $750K gadget to recycle 3D-printed plastic on the space station

By Kelly Hodgkins Updated June 27, 2016

Space Station — Vadim Sadovski/Shutterstock

NASA is paying big bucks to experiment with plastics recycling on the International Space Station. The space agency recently inked a deal with Firmamentum, a division of Tethers Unlimited, that is worth a whopping $750,000. What is this magical device that NASA is paying three-quarters or a million for? A combo 3D printer and plastics recycler, reports GeekWire.

Aptly named the Refabricator, the device can 3D print an object and then recycle that plastic for another round of printing. The system uses a recycling process known as Positrusion, which was developed for NASA as part of a previously funded project. The Refabricator machine is designed for use on the ISS and is as easy to use as a microwave, claims Tethers Unlimited. Users simply place a discarded 3D-printed object or other compatible scrap plastic into the machine, press the button, and wait for the machine to work its Positrusion magic. The end product is a filament that can be fed into the companion 3D printer.

NASA will use the Refabricator to expand its 3D-printing capabilities on the ISS. The agency already is experimenting with 3D printing in space, having installed several 3D printers on the space station earlier this year. The Refabricator will take on a different role, serving as an experimental unit to test the feasibility of recycling plastics in space.

“This is an experiment to see how many times you can recycle plastic in the microgravity environment before the polymers break down,” said Tethers Unlimited’s CEO Rob Hoyt to GeekWire during the recent NewSpace 2016 conference in Seattle, Washington.

Firmamentum plans to deliver the first Refabricator units to NASA in 2017. Money for the development of the Refabricator is being provided by NASA’s Small Business Innovation Research program and NASA’s In-Space Manufacturing project based out of the Marshall Space Flight Center in Huntsville, Alabama.

Topics

Contributor

Kelly's been writing online for ten years, working at Gizmodo, TUAW, and BGR among others. Living near the White Mountains of…

Emerging Tech

The best 3D printers under $500

3D printers are finally affordable. Here are the best models under $500

anycubic photon review 3d printer xxl 2

The 3D printing market has seen quite a few changes over the last few years. In just the span of a decade, the barrier to entry has dropped from well over several thousand dollars to under $200 in some cases. However, all entry and mid-level printers are not made equal. We have a few suggestions for prospective buyers and other information regarding alternatives not found on this list.

To some veterans of the 3D printing scene, this list may seem like it lacks a few of the most commonly recommended printers for newcomers. This is by design. Our list only considers printers with tested components from proven, reliable vendors. That's why we chose the Monoprice MP Mini v2 as our top pick--it's reliable and easy to use. We have avoided any printer with a frame primarily made from interlocking acrylic pieces and anything historically unreliable.
Most bang for your buck: Monoprice MP Mini v2

News

Ceramic ink could let doctors 3D print bones directly into a patient’s body

ceramic ink 3d printed bones bioprinting australia 2

Scientists use a novel ink to 3D print ‘bone’ with living cells

The term 3D bioprinting refers to the use of 3D printing technology to fabricate biomedical parts that, eventually, could be used to create replacement organs or other body parts as required. While we’re not at that point just yet, a number of big advances have been made toward this dream over the past couple of decades.

Emerging Tech

The future of making stuff: Inside the evolution of 3D printing with Formlabs

future of 3d printing formlabs ces 2021 castablewax40

When 3D printing went mainstream in the mid-2010s and exploded in popularity, it was about as hyped up as it possibly could be. Evangelists told us it would fundamentally transform the way goods were made, and usher in a bold new era of creative freedom. Soon, they said, we’d be able to fabricate anything we wanted on-demand, Star Trek replicator style, right from the comfort of our own homes.

But of course, 3D printing didn't really live up to that high-flying dream. Instead, it made a momentary splash and then largely returned to the fringes, gaining adoption in hobbyist workshops and cutting-edge product design labs, but not really changing the face of manufacturing in the way many hoped it might.