Skip to main content

Pax 3 vaporizer review

Discreet and simple, the Pax 3 is still the king of portable herbal vaporizers

Pax 3
Pax 3 vaporizer
MSRP $274.99
“The Pax 3 is still the best portable herbal vaporizer out there, but its improvements aren’t groundbreaking.”
Pros
  • Fast heating
  • Sleek design
  • Solid vapor production
  • Concentrate support
Cons
  • Tricky to load

For decades, smokers have looked for unique ways to take their hobby on the go without arousing too much suspicion. Herbal vaporizers like the Pax have recently presented a discreet way to vape anywhere, without compromising on vapor production or features. The Pax 3 continues that tradition with a new BLE connected app, concentrate support, and improved heating times.

But the Pax 3 has a new challenger to face: CO2 pens. These pre-filled cartridges were lurking in the shadows last year, but with the rise of recreational marijuana have become increasingly commonplace. They provide on-demand vaping with no heating time, and simple, discreet construction.

Though they might challenge the Pax’s turf, there’s still a high demand for portable, herbal vaporizers, and the Pax has always been a leader in that market. Is the new Pax still top dog, or the last of a dying breed?

Design

The Pax 3 remains the exact same size as the Pax 2. It’s hard to point to anything for comparative size, but suffice to say the device easily fits in your hand, with the ends sticking out a bit from each side.

Instead of a matte brushed finish, the aluminum Pax 3 is now polished to a high shine. The change certainly looks spectacular, but we have to wonder whether it might scratch easily over time, especially considering the state of our well-loved Pax 1 after a few years.

Other than that, things haven’t changed much. One end of the device has a spot for a flat or raised mouthpiece. The other end features a magnetic lid, which keeps your material in the bowl, or oven as it’s called. We found last time around that tightly packed ovens produced the most vapor, so Pax has included an oven lid with a larger protrusion, so you don’t have to load it completely full to achieve the same effect.

Unfortunately, the Pax 3 is still tricky to load. You have to balance the device with the mouthpiece on a flat surface, and tamp down finely ground material. Knock it over and you’ll send all of that good stuff flying. It’s been an issue since the first Pax that won’t be solved without a form factor change. We used the same 3D-printed funnel and tamper as last time, which helped smooth out the process, but the risk is still there.

Controls

Like both devices before it, the Pax uses an accelerometer and single button for all of its controls, with a four-petal RGB LED readout on the front. Clicking the button once turns the Pax on and off, while holding down the button for a few seconds will open the temperature settings.

There are several operating modes, and they’re accessed by rolling the Pax around in your hands like an ear of corn. Three turns starts party mode, which reduces the temperature so it’s easier to pass around without burning anything off. There are games, like Simon, and light modes that turn the device into a colorful light baton.

It’s a novel control system, but it’s not exactly intuitive, and rotations can be an inconsistent way of changing modes. To that end, Pax has released an app that pairs with each vaporizer over Bluetooth LE. The app isn’t quite ready yet, but we’ll make sure to update the review once it is.

A word on heat

When discussing herbal vaporizers, it’s important to mention different heating methods. The Pax 3, like the models before it, uses conductive heating. A heating element warms up the walls of the oven, and your breath pulls the vapor out of the chamber. Portable vaporizers like the Firefly 2 and Magic Flight Launch Box generate the heat outside of the bowl, and use your breath to pull hot air through the materials.

Pax 3
Bill Roberson/Digital Trends
Bill Roberson/Digital Trends

That means the Pax has to be constantly used once turned on, at least for the most part. While the lip sensor will turn the temperature down while no one is drawing, and setting it down will cause it to idle temporarily, someone telling a story and gesticulating with the vaporizer is apt to burn away a whole oven without realizing it.

Heats fast, vapes faster

One of the immediately noticeable improvements over the Pax 2 is heating time. It now takes around 10 or 20 seconds for the Pax 2 to reach vaping temperatures, twice as quick as the previous iteration. With the rise of pre-loaded CO2 cartridges, it’s great to see the herbal side of things keeping up with on-demand readiness.

Don’t expect fat clouds of vapor when you exhale, but instead efficient, tuned puffs.

Vapor production is a strong point for the Pax, but there’s a bit of a learning curve involved. You have to breathe deep, with a solid stream of air, but the pacing requires some practice. Pull too fast and you won’t get anything, too slow and the vapor will be too hot.

Once you’ve spent some time with it, it starts to become much more intuitive. Don’t expect fat clouds of vapor when you exhale, but instead efficient, tuned puffs. Taste is a standout feature, as the vapor has just enough space to cool down without losing any flavor.

Ten years

The Pax 3 is backed by a 10-year warranty, which is seriously long compared to most gadgets, and still strong compared to most vaporizers. Storz and Bickel’s Crafty covers wear and tear for two years, while the Firefly 2 is covered for two. The Magic Flight Launch Box is a standout, with a lifetime warranty and free replacements, but it’s hard to compete with that.

It’s worth noting that none of these warranties cover accidental damage. If the heating elements stops working, you’re covered. If you drop it in a hot tub, you’re on your own.

Conclusion

At the end of the day, the Pax 3 is as strong of an herbal vaporizer as the previous generation, and one of the best portable options on the market. It boasts a sleek design, lightning fast heating, and clean, strong vapor. It also carries a $280 price tag, the same as both previous iterations when they were new.

If this isn’t a market you’re familiar with, that might sound like a lot, but it’s right in line with other high-end devices. Storz and Bickel, the same company responsible for the Volcano, makes a portable vaporizer called the Crafty which costs $300, and is fairly comparable. The Firefly 2, a convection vaporizer with a similar feature set, sells for $329. The Pax is only undercut by the previously mentioned Magic Flight Launch Box, which starts at $119, but it lacks any electronics, and has a steeper learning curve.

The bigger question is whether the Pax 3 is a worthy upgrade from the Pax 2. Looking back, the original device was innovative, but clumsy, with a mechanical mouthpiece that needed to be lubed often. The Pax 2 was a no-brainer upgrade, with big features, reduced size, and improved design. The jump to the 3 is a revision of an already impressive device, but it doesn’t offer anything super exciting not found on the Pax 2. If you’re picking up your first portable herbal vaporizer, spring for the Pax 3, but if you already have the Pax 2, go ahead and pack another oven.

Brad Bourque
Former Digital Trends Contributor
Brad Bourque is a native Portlander, devout nerd, and craft beer enthusiast. He studied creative writing at Willamette…
Juiced Bikes offers 20% off on all e-bikes amid signs of bankruptcy
Juiced Bikes Scrambler ebike

A “20% off sitewide” banner on top of a company’s website should normally be cause for glee among customers. Except if you’re a fan of that company’s products and its executives remain silent amid mounting signs that said company might be on the brink of bankruptcy.That’s what’s happening with Juiced Bikes, the San Diego-based maker of e-bikes.According to numerous customer reports, Juiced Bikes has completely stopped responding to customer inquiries for some time, while its website is out of stock on all products. There are also numerous testimonies of layoffs at the company.Even more worrying signs are also piling up: The company’s assets, including its existing inventory of products, is appearing as listed for sale on an auction website used by companies that go out of business.In addition, a court case has been filed in New York against parent company Juiced Inc. and Juiced Bike founder Tora Harris, according to Trellis, a state trial court legal research platform.Founded in 2009 by Harris, a U.S. high-jump Olympian, Juiced Bikes was one of the early pioneers of the direct-to-consumer e-bike brands in the U.S. market.The company’s e-bikes developed a loyal fandom through the years. Last year, Digital Trends named the Juiced Bikes Scorpion X2 as the best moped-style e-bike for 2023, citing its versatility, rich feature set, and performance.The company has so far stayed silent amid all the reports. But should its bankruptcy be confirmed, it could legitimately be attributed to the post-pandemic whiplash experienced by the e-bike industry over the past few years. The Covid-19 pandemic had led to a huge spike in demand for e-bikes just as supply chains became heavily constrained. This led to a ramp-up of e-bike production to match the high demand. But when consumer demand dropped after the pandemic, e-bike makers were left with large stock surpluses.The good news is that the downturn phase might soon be over just as the industry is experiencing a wave of mergers and acquisitions, according to a report by Houlihan Lokey.This may mean that even if Juiced Bikes is indeed going under, the brand and its products might find a buyer and show up again on streets and trails.

Read more
Volkswagen plans 8 new affordable EVs by 2027, report says
volkswagen affordable evs 2027 id 2all

Back in the early 1970s, when soaring oil prices stifled consumer demand for gas-powered vehicles, Volkswagen took a bet on a battery system that would power its first-ever electric concept vehicle, the Elektro Bus.
Now that the German automaker is facing a huge slump in sales in Europe and China, it’s again turning to affordable electric vehicles to save the day.Volkswagen brand chief Thomas Schaefer told German media that the company plans to bring eight new affordable EVs to market by 2027."We have to produce our vehicles profitably and put them on the road at affordable prices," he is quoted as saying.
One of the models will be the ID.2all hatchback, the development of which is currently being expedited to 36 months from its previous 50-month schedule. Last year, VW unveiled the ID.2all concept, promising to give it a price tag of under 25,000 euros ($27,000) for its planned release in 2025.VW CEO Larry Blume has also hinted at a sub-$22,000 EV to be released after 2025.It’s unclear which models would reach U.S. shores. Last year, VW America said it planned to release an under-$35,000 EV in the U.S. by 2027.The price of batteries is one of the main hurdles to reduced EV’s production costs and lower sale prices. VW is developing its own unified battery cell in several European plants, as well as one plant in Ontario, Canada.But in order for would-be U.S. buyers to obtain the Inflation Reduction Act's $7,500 tax credit on the purchase of an EV, the vehicle and its components, including the battery, must be produced at least in part domestically.VW already has a plant in Chattanooga, Tennesse, and is planning a new plant in South Carolina. But it’s unclear whether its new unified battery cells would be built or assembled there.

Read more
Nissan launches charging network, gives Ariya access to Tesla SuperChargers
nissan charging ariya superchargers at station

Nissan just launched a charging network that gives owners of its EVs access to 90,000 charging stations on the Electrify America, Shell Recharge, ChargePoint and EVgo networks, all via the MyNissan app.It doesn’t stop there: Later this year, Nissan Ariya vehicles will be getting a North American Charging Standard (NACS) adapter, also known as the Tesla plug. And in 2025, Nissan will be offering electric vehicles (EVs) with a NACS port, giving access to Tesla’s SuperCharger network in the U.S. and Canada.Starting in November, Nissan EV drivers can use their MyNissan app to find charging stations, see charger availability in real time, and pay for charging with a payment method set up in the app.The Nissan Leaf, however, won’t have access to the functionality since the EV’s charging connector is not compatible. Leaf owners can still find charging stations through the NissanConnectEV and Services app.Meanwhile, the Nissan Ariya, and most EVs sold in the U.S., have a Combined Charging System Combo 1 (CCS1) port, which allows access to the Tesla SuperCharger network via an adapter.Nissan is joining the ever-growing list of automakers to adopt NACS. With adapters, EVs made by General Motors, Ford, Rivian, Honda and Volvo can already access the SuperCharger network. Kia, Hyundai, Toyota, BMW, Volkswagen, and Jaguar have also signed agreements to allow access in 2025.
Nissan has not revealed whether the adapter for the Ariya will be free or come at a cost. Some companies, such as Ford, Rivian and Kia, have provided adapters for free.
With its new Nissan Energy Charge Network and access to NACS, Nissan is pretty much covering all the bases for its EV drivers in need of charging up. ChargePoint has the largest EV charging network in the U.S., with over 38,500 stations and 70,000 charging ports at the end of July. Tesla's charging network is the second largest, though not all of its charging stations are part of the SuperCharger network.

Read more