Skip to main content
  1. Home
  2. Emerging Tech
  3. Guides

How to inject some DIY into your outdated digital camera

By

DIYThe rate at which digital cameras are improving and smartphone photo apps are taking over translates to a whole lot of discarded and outdated point and shoots sitting around. The $200 you spent on a pocket cam last year might be a cost you eat if you find yourself relying entirely on your iPhone. Luckily, there are a handful of fun mods that will repurpose your old point and shoot. You might not be able to do anything about that wimpy 8-megapixel sensor or the pitiful 4x digital zoom, but take inspiration from these DIY camera hacks that give your old device some new tricks.

Webcam

What you’ll need: Old digital camera (that has video capture/video output), a computer with video input (if your computer doesn’t have this, you can get a USB capture adapter), adjustable grip tripod

webcam supplies
Image used with permission by copyright holder

How to: There isn’t too much to explain about this DIY trick. You’ll probably spend most of your time figuring out a good to position your new Webcam. A flexible camera tripod of some (like the GorillaPod) is probably your best bet, but consider this element up for interpretation. After that, all you need to do is hook your camera up to your computer from its A/V out port and then open up whatever video chat software you choose.

Recommended Videos

Infrared camera

What you’ll need: Old digital camera, small screwdrivers (used for jewelry or eyeglasses), tweezers, a piece of glass or film negative

IR supplies
Image used with permission by copyright holder

How to: Here are some really great detailed instructions on how to do this and what you’re looking for. Here’s the gist: you want to take apart your old camera, so turn it upside down and unscrew the thing and then gently open it up. You’re looking for the “hot filter,” which sits between the lens and the CCD and replace it with a piece of glass or underexposed, developed slide film negatives cut to the same size as what you are replacing. You’ll then want to put her back together (again, carefully), and try out your new IR camera.

Nightlight

What you’ll need: Old digital camera, small nightlight, small screwdrivers (use for jewelry or eyeglasses), sharp knife, all-purpose glue

supplies nightlight
Image used with permission by copyright holder

How to: First of all, be careful. You essentially need to cut the inside of your camera once you’ve carefully opened it, and there are lots of tiny parts in there to be careful of. In order to keep the shell of the device whole, you need to take your time and do this the right way. You’ll want to get the lens out too. A pair of tweezers might make things easier as well.

Once you have nothing but an empty camera, fix the night light in it using some sort of super stick glue (a hot glue gun should also work) and then closer her up. You’ll need to cut a hole in the back of the chassis for the prongs to stick out of. After that, shut her back up and if the screws seem loose, try gluing around the camera’s seam for extra support.

Self-portrait camera

What you’ll need: Old digital camera, small mirror, all-purpose glue

self portrait camera suppliesHow to: Here is an incredibly easy way to repurpose your old digital camera. If you’re a fan of the self-portrait (it’s okay, I’m not going to shame you), then you need a solution so that you can stop cutting off one or all of your subjects. Find a small mirror from a makeup compact (you can also buy them at craft stores) and fix this piece to the face of your digital camera. The mirror’s size and placement will depend on where the lens is located, but you’ll quickly and easily have a way to start seeing what you’re shooting.

Topics
Molly McHugh
Molly McHugh
Former Digital Trends Contributor
Before coming to Digital Trends, Molly worked as a freelance writer, occasional photographer, and general technical lackey…
Juiced Bikes offers 20% off on all e-bikes amid signs of bankruptcy
Juiced Bikes Scrambler ebike

A “20% off sitewide” banner on top of a company’s website should normally be cause for glee among customers. Except if you’re a fan of that company’s products and its executives remain silent amid mounting signs that said company might be on the brink of bankruptcy.That’s what’s happening with Juiced Bikes, the San Diego-based maker of e-bikes.According to numerous customer reports, Juiced Bikes has completely stopped responding to customer inquiries for some time, while its website is out of stock on all products. There are also numerous testimonies of layoffs at the company.Even more worrying signs are also piling up: The company’s assets, including its existing inventory of products, is appearing as listed for sale on an auction website used by companies that go out of business.In addition, a court case has been filed in New York against parent company Juiced Inc. and Juiced Bike founder Tora Harris, according to Trellis, a state trial court legal research platform.Founded in 2009 by Harris, a U.S. high-jump Olympian, Juiced Bikes was one of the early pioneers of the direct-to-consumer e-bike brands in the U.S. market.The company’s e-bikes developed a loyal fandom through the years. Last year, Digital Trends named the Juiced Bikes Scorpion X2 as the best moped-style e-bike for 2023, citing its versatility, rich feature set, and performance.The company has so far stayed silent amid all the reports. But should its bankruptcy be confirmed, it could legitimately be attributed to the post-pandemic whiplash experienced by the e-bike industry over the past few years. The Covid-19 pandemic had led to a huge spike in demand for e-bikes just as supply chains became heavily constrained. This led to a ramp-up of e-bike production to match the high demand. But when consumer demand dropped after the pandemic, e-bike makers were left with large stock surpluses.The good news is that the downturn phase might soon be over just as the industry is experiencing a wave of mergers and acquisitions, according to a report by Houlihan Lokey.This may mean that even if Juiced Bikes is indeed going under, the brand and its products might find a buyer and show up again on streets and trails.

Read more
Volkswagen plans 8 new affordable EVs by 2027, report says
volkswagen affordable evs 2027 id 2all

Back in the early 1970s, when soaring oil prices stifled consumer demand for gas-powered vehicles, Volkswagen took a bet on a battery system that would power its first-ever electric concept vehicle, the Elektro Bus.
Now that the German automaker is facing a huge slump in sales in Europe and China, it’s again turning to affordable electric vehicles to save the day.Volkswagen brand chief Thomas Schaefer told German media that the company plans to bring eight new affordable EVs to market by 2027."We have to produce our vehicles profitably and put them on the road at affordable prices," he is quoted as saying.
One of the models will be the ID.2all hatchback, the development of which is currently being expedited to 36 months from its previous 50-month schedule. Last year, VW unveiled the ID.2all concept, promising to give it a price tag of under 25,000 euros ($27,000) for its planned release in 2025.VW CEO Larry Blume has also hinted at a sub-$22,000 EV to be released after 2025.It’s unclear which models would reach U.S. shores. Last year, VW America said it planned to release an under-$35,000 EV in the U.S. by 2027.The price of batteries is one of the main hurdles to reduced EV’s production costs and lower sale prices. VW is developing its own unified battery cell in several European plants, as well as one plant in Ontario, Canada.But in order for would-be U.S. buyers to obtain the Inflation Reduction Act's $7,500 tax credit on the purchase of an EV, the vehicle and its components, including the battery, must be produced at least in part domestically.VW already has a plant in Chattanooga, Tennesse, and is planning a new plant in South Carolina. But it’s unclear whether its new unified battery cells would be built or assembled there.

Read more
Nissan launches charging network, gives Ariya access to Tesla SuperChargers
nissan charging ariya superchargers at station

Nissan just launched a charging network that gives owners of its EVs access to 90,000 charging stations on the Electrify America, Shell Recharge, ChargePoint and EVgo networks, all via the MyNissan app.It doesn’t stop there: Later this year, Nissan Ariya vehicles will be getting a North American Charging Standard (NACS) adapter, also known as the Tesla plug. And in 2025, Nissan will be offering electric vehicles (EVs) with a NACS port, giving access to Tesla’s SuperCharger network in the U.S. and Canada.Starting in November, Nissan EV drivers can use their MyNissan app to find charging stations, see charger availability in real time, and pay for charging with a payment method set up in the app.The Nissan Leaf, however, won’t have access to the functionality since the EV’s charging connector is not compatible. Leaf owners can still find charging stations through the NissanConnectEV and Services app.Meanwhile, the Nissan Ariya, and most EVs sold in the U.S., have a Combined Charging System Combo 1 (CCS1) port, which allows access to the Tesla SuperCharger network via an adapter.Nissan is joining the ever-growing list of automakers to adopt NACS. With adapters, EVs made by General Motors, Ford, Rivian, Honda and Volvo can already access the SuperCharger network. Kia, Hyundai, Toyota, BMW, Volkswagen, and Jaguar have also signed agreements to allow access in 2025.
Nissan has not revealed whether the adapter for the Ariya will be free or come at a cost. Some companies, such as Ford, Rivian and Kia, have provided adapters for free.
With its new Nissan Energy Charge Network and access to NACS, Nissan is pretty much covering all the bases for its EV drivers in need of charging up. ChargePoint has the largest EV charging network in the U.S., with over 38,500 stations and 70,000 charging ports at the end of July. Tesla's charging network is the second largest, though not all of its charging stations are part of the SuperCharger network.

Read more