Skip to main content

B&W’s first true wireless earbuds come with their own Bluetooth transmitter

B&W PI7 true wireless earbuds
Bowers & Wilkins

Bowers & Wilkins (B&W) has finally launched its first true wireless earbuds. The $399 PI7 (available in white or charcoal) and the $249 PI5 (available in white or black) both feature active noise cancellation (ANC) and IP54 dust and water protection, but the PI7 includes a feature we’ve never seen before: Its charging case can double as a Bluetooth transmitter for times when you want to listen to a non-Bluetooth audio source like the headphone jack on an airplane seat.

We’ve seen other companies try to bridge that wireless gap using a series of wired tethers, like the Motorola Tech3, but B&W’s solution is both more compact and more elegant. A 3.5mm-to-USB-C cord lets you plug the PI7’s charging case into any analog audio source. The transmitter connects automatically to the PI7 earbuds, but if you put the earbuds back in their case, you can also pair one of B&W other wireless headphones, like the PX7.

When you consider that an AirFly transmitter costs $40, the PI7’s clever case goes a long way to helping justify the premium price B&W has placed on these earbuds.

Both the PI7 and PI5’s cases support either wired or wireless charging.

There’s also an impressive amount of tech within the earbuds themselves. The PI7 use a dual driver arrangement, with one dynamic driver and one balanced armature driver, each with its own discrete amplifier. They connect to wireless devices using Qualcomm’s aptX Adaptive Bluetooth codec, which bundles aptX and aptX HD into a single, automatically adjusting package that is capable of up to 24-bit/96kHz audio for a better-than-CD experience depending on the source.

The PI5 gets Qualcomm’s aptX codec, which allows for a higher-quality Bluetooth connection on Android devices.

Bowers & Wilkins true wireless
Bowers & Wilkins

A three-microphone array on each earbud powers the PI7’s noise-canceling and calling features (the PI5 has two mics per earbud) and both models have transparency modes to let you hear the outside world.

The outer surfaces of these earbuds look like touch controls, but B&W says they’re in fact physical buttons, which should offer more precise and tactile operation. Wear sensors let your music auto-pause and resume when you remove or reinsert the earbuds.

Battery life appears to be the one area where B&W’s new earbuds fall a bit short: Both models only get about four hours of operation per charge, which is less than most other true wireless earbuds at these prices. The PI7’s case holds 16 extra hours, while the PI5’s holds an additional 20. Both models can fast-charge for 15 minutes and get two hours of operation.

Editors' Recommendations

Simon Cohen
Contributing Editor, A/V
Simon Cohen covers a variety of consumer technologies, but has a special interest in audio and video products, like…
V-Moda’s first true wireless earbuds come with tons of fit options
V-Moda Hexamove Lite true wireless earbuds.

V-Moda has released its first true wireless earbuds, called the Hexamove. There are two versions of the earbuds, including the $170 Hexamove Pro, which come with a variety of accessories for customizing their fit, fashion, and function. Then there are the $130 Hexamove Lite, which are identical to the Pro, except that they don't come with the extra accessories. Both are available starting today, October 12, at Amazon and other retailers.

Unlike other brands of true wireless earbuds that have started to cram in every imaginable feature -- like active noise cancellation, in-ear detection, transparency mode, and wireless charging -- V-Moda appears to be trying to differentiate the Hexamove with a unique style and the ability to customize both the look and the fit.

Read more
Soundcore Liberty 3 Pro earbuds go after Sony’s wireless hi-res crown
Anker Soundcore Liberty 3 Pro.

Anker's Soundcore brand of personal audio devices just released the latest in its Liberty line of true wireless earbuds, and the company seems to be throwing everything it has at them. The $170 Liberty 3 Pro feature a 30% smaller shape than their predecessor, the Liberty 2 Pro, plus they come equipped with active noise cancellation (ANC) and hi-res Bluetooth codecs, things the original version of the older model lacked. The Liberty 3 Pro come in four colors -- black, white, gray, and purple. If you buy them between today and October 14, you can save $20 at Amazon and at other retailers.

We were blown away by how great the Liberty 2 Pro performed. We only noted a few drawbacks -- a bulky design, and some fiddly buttons. Soundcore was apparently taking careful note -- the Liberty 3 Pro are notably smaller (though they'll likely still stick out from your ears a bit), and the tiny physical buttons have been ditched in favor of touch controls. They also look decidedly more high-end, with a mirrorlike finish and chrome accents. Soundcore says they'll feel more comfortable thanks to the shape of the redesigned silicon earwings.

Read more
Grell Audio promises audiophile-grade wireless earbuds for $200
Grell Audio TWS/1 noise-canceling true wireless earbuds.

Grell Audio isn't a household name, but its founder, Axel Grell, is something of a legend in the audiophile community. As Sennheiser's lead headphones designer for the better part of 30 years, he was a driving force behind the company's line of highly regarded audio products, like the pricey but extraordinary HD800 and HD800S. Now, out on his own, Grell has his sights set on a new goal: To produce a set of true wireless earbuds that don't compromise on sound quality and, perhaps more importantly, don't cost the equivalent of lease payment on a Ferrari. His first attempt is embodied in the Grell TWS/1, a slick-looking set of earbuds that cost $200, and can be pre-ordered from the Grell Audio website starting today and shipping expected by November.

"I always try to create the best possible acoustical experience for the money, no matter the price point," said Axel Grell in a press release.  The TWS/1 features and specs seem to support Grell's statement. With the exception of active noise cancellation (ANC), most of the embedded tech appears geared toward a higher standard of audio performance: High precision dynamic drivers,  dynamic transducers with a tolerance of +/- 1 db, and strong support for high-quality Bluetooth codecs like SBC, AAC, aptX, aptX HD,  aptX adaptive, and LHDC. Grell has even included Sonarworks' SoundID personalized tuning software to help folks adapt the sound of the TWS/1 to their particular hearing profile.

Read more