You spend a good amount of time looking at your TV screen, so it's surprising when you don't notice how dirty it is. However, dirt and debris have a way of building up on screened devices, and if you want the best performance, you have to clean your TV and other screens from time to time. Gunk and other accumulated detritus can be damaging to your precious TV panel, so it's best to give your television a good cleaning. Fortunately, you only need a few products to get the job done, and it's a fairly straightforward process. Read on to become an expert in cleaning your TV.
Cleaning the display
Follow these steps to perform a safe and effective general cleaning of the display:
Step 1: The first thing you’ll want to do is turn off your television and make sure it has a chance to cool down.
Step 2: Wait until it’s no longer warm before proceeding with the following steps. Failure to do so could cause some damage.
Step 3: When it’s cool to the touch, dust the screen to remove any dirt particles, then wipe it over with your soft, lint-free cloth to remove any residual dust.
Step 4: If you can’t see any visible smudges after you’re done dusting, stop here.
Sometimes you may need a deeper clean
If your screen is still covered in muck, it’s time to mix up a batch of cleaning solution.
Step 1: Mix the isopropyl alcohol with water in a measuring cup, ensuring the solution is equal parts water and alcohol. If you don’t have a measuring cup, try using a shot glass to measure quantities before mixing. In any case, just make sure you’re not overdoing it with the alcohol — the resulting solution shouldn’t be more than half alcohol or it could tarnish the display.
Step 2: Dip your cloth into your freshly mixed solution and wring it out to remove excess moisture. You want the cleaning cloth to be damp, not wet.
Step 3: Gently wipe the damp cloth across your display.
Step 4: Use the second lint-free cloth to dry your display. Don’t leave any moisture on it — you’ll want it to be completely dry before turning the TV back on.
Cleaning an older tube TV screen
We can’t just ignore the O.G. hardware. If you’ve still got an older tube-style TV hanging around the house and it simply refuses to die, here’s a quick how-to for getting the smudges and dust off of your old giant. Luckily, you’ll be able to use some household cleaners you probably have hanging around.
Step 1: Unplug your TV. If it was on for a while before you unplugged, give it time to cool down.
Step 2: Once the TV has settled down to room temperature, grab that same microfiber cloth you used for your prized living room QLED and wipe away any dust on the tube TV’s screen. Once the dust has cleared, you may still have fingerprints and other gunk to contend with.
Step 3: To clear the rest of the mess, you can use the same solution you put together to clean your high-end TV. If you’re lacking the materials to create this concoction, you can use a regular glass cleaner instead. This is because most older tube TVs actually have glass screens.
Important note: Do not under any circumstances use regular glass cleaner to clean an HDTV. The harsh chemicals used in the cleaner will damage the TV screen.
Additional tips
- If your TV’s bezel makes it difficult to clean the corners and near the edges of the display, use a cotton swab dampened with your solution to get to the hard-to-reach areas.
- Make sure you’re using the right chemical. Don’t use ethyl alcohol, acetone, toluene, ethyl acid, ammonia, or methyl chloride — only isopropyl alcohol.
- Always use a clean cloth, as hard particles can get trapped in cloth fibers and leave unwanted scratches.
- Ensure your cleaning cloth is damp, not wet. You don’t want drops running down your display with each wipe.
- Do not use Windex or other glass cleaners! Such solutions generally contain ammonia and will hurt your TV screen.
- Do not use paper towels; they leave behind tiny bits of paper that can mess up your display.
Now that your TV is like new, why not give your earbuds a cleaning?
