Skip to main content

Digital Trends may earn a commission when you buy through links on our site. Why trust us?

Jabra’s latest wireless earbuds have Dolby spatial audio

Jabra Elite 10.
Jabra Elite 10. Jabra

Jabra has launched two new models of wireless earbuds — it’s new flagship, the Jabra Elite 10 ($249), and a new ultra-rugged model, the Elite 8 Active ($199) — targeted at those with active lifestyles. Each is equipped active noise cancellation (ANC) and Dolby audio — the Elite 8 Active get Dolby spatial sound, while the Elite 10 get Dolby Atmos with head tracking for an even more immersive listening experience.

They replace the Jabra Elite 7 Pro, Elite 7 Active, and Jabra Elite 85t, which will remain available until Jabra’s existing inventory is depleted. The Elite 8 Active is available immediately via jabra.com and select retailers, while the Elite 10 will make its retail debut in September.

Recommended Videos

Both models have Bluetooth Multipoint, Fast Pair, Swift Pair, and Spotify Tap playback, and both are targeted to be compatible with Bluetooth LE Audio (with LC3 and LC3plus codec support) after a future firmware update.

You can check out our full review of the Jabra Elite 10, and we expect to review the Elite 8 Active shortly. Here are the highlights for each model.

Jabra Elite 10

Jabra Elite 10 in five colors.
Jabra Elite 10 in cream, cocoa, titanium black, gloss black, and matte black. Jabra

The Elite 10 look like a hybrid of the Elite 7 Pro and the older Elite 85t. They sport the 7 Pro’s teardrop-shaped multifunction button, but they’re slightly larger and use a vented design like the 85t to help reduce the so-called occlusion effect (that feeling of having blocked ears). Jabra has revised the shape of the eartips, making them an asymmetrical oval shape instead of the company’s usual round design. A soft silicone finish has been applied to the entire body of the earbud and it’s more egglike shape is meant to provide a more comfortable fit.

The 85t was also intended to be more comfortable, but it gave up ruggedness to do so, with a limited IPX4 rating for water resistance. The Elite 10 are much hardier by comparison, with a fully waterproof IP57 rating, the same as the Elite 7 Pro it replaces.

Jabra says the Elite 10 get its best level of advanced ANC performance — it claims it’s twice as effective as the entry-level Jabra Elite 4 — and that the three-mic-per-earbud system will deliver better call clarity in any environment.

However the big addition to the earbuds is the inclusion of an optional spatial audio mode powered by Dolby. You’ll be able to switch to Dolby Atmos processing, which will enhance normal, two-channel stereo sound to be more immersive. You can also enable head tracking, which will anchor certain parts of your audio to the “front” of your space as you move your head.

The Elite 10 has a redesigned wireless charging case and the earbuds get a claimed six hours of battery life with ANC turned on and a total of 27 hours when you include the case.

Jabra Elite 8 Active

Jabra Elite 8 Active.
Jabra

The Elite 8 Active have an almost identical shape to the Elite 7 Active, and they use the same ShakeGrip rubberized silicone to create a very secure fit. They may look the same, but Jabra has improved the ruggedness of these earbuds, which now sport an IP68 rating — the highest dustproof, watertight, and sweatproof protection you can get in a personal audio product. The case has also been ruggedized with an IP54 rating — a rare level of protection for a charging case in the wireless earbuds world.

Jabra also claims that the Elite 8 Active have achieved the 810H U.S. military standard for ruggedized electronics, and that they’ve undergone Highly Accelerated Corrosion Testing (HACT), which requires the earbuds to pass 11 cycles of testing, including enduring two hours in 104-degree Fahrenheit temperatures with 93% humidity, a 15-minute splash test in saltwater, and a 15-minute drying test at 104 degrees to prove their anticorrosion credentials.

Jabra Elite 8 Active in four colors.
Jabra Elite 8 Active in caramel, navy, black, and dark gray. Jabra

The Elite 8 Active also get an option for Dolby Audio with spatial sound, but it’s not quite as immersive an effect as the Elite 10’s Dolby Atmos and there’s no option for head tracking. They get Jabra’s adaptive hybrid ANC system, which though a step down from the best advanced ANC tech, should still deliver excellent sound suppression thanks to the fully sealed design of the earbuds.

Battery life is slightly improved from the Elite 7 Active. You still get a claimed up to eight hours of playtime, but now the total time has been extended by two hours to 32 hours.

Simon Cohen
Simon Cohen is a contributing editor to Digital Trends' Audio/Video section, where he obsesses over the latest wireless…
Bowers & Wilkins’ wireless earbuds get a massive redesign
Bowers & Wilkins Pi8.

Bowers & Wilkins (B&W) has completely revamped its wireless earbuds with a new shape for greater comfort, hi-res and lossless audio, better single-charge battery life, and the ability to connect to two devices simultaneously. Its new flagship, the Pi8, is available starting August 21 for $399, while the midrange Pi6 will follow in early September for $249. Both will be available in a choice of four colors.

The Bowers & Wilkins Pi6.\ Bowers & Wilkins

Read more
Earfun Air Pro 4 ANC earbuds go all-in on hi-res, lossless, and Auracast for under $100
Earfun Air Pro 4.

Earfun has announced the Air Pro 4 -- its latest noise-canceling wireless earbuds -- in black and white versions. And though the $90 Air Pro 4 might look very similar to the Air Pro 3, Earfun has made some significant changes with this new generation, including offering a choice of hi-res audio and lossless Bluetooth codecs. There's also a promise of Auracast support. The new earbuds will be available August 5 from Amazon and other retailers.

Plenty of wireless earbuds now come with some kind of support for hi-res audio. Sometimes they'll use Sony's LDAC codec, which has been baked into Android since version 8.0, or more commonly, they'll incorporate Qualcomm's aptX Adaptive technology. Some high-end models, like the Sennheiser Momentum True Wireless 4 add in Qualcomm's Snapdragon Sound, which comes with the company's aptX Lossless codec for CD-quality audio when used with a compatible phone -- but then that invariably means there's no LDAC option.

Read more
Cambridge Audio’s first wireless headphones boast AB amplification, long battery life
Cambridge Audio Melomania P100 wireless headphones.

Cambridge Audio is no stranger to the audiophile world or its denizens, who like to obsess over sound quality. So it's no surprise that the company's first set of wireless headphones -- the Melomania P100 -- have a bunch of features aimed squarely at this market. You can buy the new noise-canceling cans for $279 in either black or white starting in July at both cambridgeaudio.com and Amazon.

Design-wise, the P100 may share many design traits with other flagship headphones -- the aluminum and plastic materials are especially reminiscent of Bose's recently released QuietComfort Ultra Headphones -- but under the surface lurks an unusual feature: The company has equipped the P100 with AB amplification, typically reserved for dedicated hi-fi components. It's the same audiophile-grade technology that Cambridge Audio used in its Melomania M100 wireless earbuds.

Read more