Skip to main content
  1. Home
  2. News

NASA declares first part of Webb sunshield deployment a success

By

Three-and-a-half days into its mission and around 320,000 miles from Earth, the James Webb Space Telescope is now gradually opening up from the compact shape that enabled the enormous apparatus to fit inside the rocket’s fairing on launch day.

Having already completed two successful burns and the deployment of its solar array and antenna, the Webb team is now starting the most challenging part of its early operations: Opening the giant sunshield.

Recommended Videos

About the size of a tennis court, deploying such a large piece of kit is no easy feat, and if it goes wrong, the $10 billion telescope could miss its chance to peer into deep space in the hope of unlocking some of the secrets of our universe.

Related

The good news is that first two stages of the sunshield’s deployment have been declared a success. They took place on Tuesday and involved unfolding the forward and aft (back) sunshield pallet that will hold the sunshield’s five layers once it’s fully deployed.

You can see how the pallets were deployed in the video below.

James Webb Space Telescope Deployment Sequence (Nominal)

“Webb is beginning to resemble the form it will take when it is fully deployed now that the mission operations team has successfully deployed and latched into place the observatory’s forward and aft Unitized Pallet Structures,” NASA said on Tuesday, following confirmation of the pallets’ deployment.

The agency, which partnered with the European Space Agency and the Canadian Space Agency for the mission, said the Webb team began working through the deployment of the forward pallet on Tuesday morning, finishing the process at about 1:20 p.m. ET. It then oversaw the deployment of the aft pallet, which finished at just after 7:25 p.m. ET.

“While the actual motion to lower the forward pallet from its stowed to its deployed position took only 20 minutes, and the lowering of the aft pallet took only 18 minutes, the overall process took several hours for each because of the dozens of additional steps required,” NASA said.

The additional processes included monitoring structural temperatures, positioning the observatory in a way for the sun to provide optimal temperatures, activating heaters to warm key components, setting off release mechanisms, configuring electronics and software, and finally, latching the pallets into position.

More steps are required for the sunshield’s full deployment, with Sunday, January 2 set as the target date for completing the process.

Following that, the telescope’s large, golden mirror has to be deployed in what will be another nail-biting process for NASA and its partners, as well as those following the mission from around the world.

The most powerful space telescope ever built is currently heading toward its destination orbit — a point known as L2 — around a million miles from Earth. It’s expected to arrive there toward the end of January.

After that, around five months will be needed to align the telescope’s mirror and fine-tune its instruments.

Once all of these processes are complete, the James Webb Space Telescope can then properly begin its highly anticipated work that’s expected to take human understanding of the universe to a whole new level.

Editors’ Recommendations

Topics
Trevor Mogg
Trevor Mogg
Contributing Editor
Not so many moons ago, Trevor moved from one tea-loving island nation that drives on the left (Britain) to another (Japan)…
NASA pushes its mega moon rocket test back to next week
NASA’s Space Launch System (SLS) rocket with the Orion spacecraft aboard is seen atop a mobile launcher.

After two false starts, NASA is hoping that the third time will be the charm for the wet dress rehearsal of its Space Launch System (SLS) rocket. The enormous rocket which is intended to carry humans to the moon and, eventually, perhaps even to Mars, is undergoing the final major test before its launch -- a rehearsal in which the rocket is brought out to the launch pad, filled with fuel, and a countdown is started and recycled as it would be for an actual launch. The rocket won't leave the ground, but the rocket's systems are all powered on and this rehearsal checks that everything is ready for when it does actually launch.

The first test was scheduled for last weekend on Sunday, April 3, and went ahead despite weather including lightning that struck the towers around the rocket. The lightning towers are designed to absorb lightning for just such an occurrence, so no damage was done to the rocket. However, there was a problem with a fan safety system which meant the test had to be called off. NASA tried again the next day on Monday, April 4, but had to scrub for a second time due to a stuck valve.

Read more
James Webb’s MIRI instrument about to face most daunting challenge yet
MIRI is inspected in the giant clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, in 2012.

In the long process of getting ready to take its first scientific observations this summer, the James Webb Space Telescope now has three out of its four instruments aligned to its mirrors. The fourth instrument, MIRI or the mid-infrared instrument, will take a little longer because it uses a different type of sensor which needs to be kept at an extremely low temperature -- and achieving this temperature requires, perhaps surprisingly, both a cooler and a heater. Now, NASA has shared an update on the process of getting MIRI down to temperature and ready for operations.

Webb's three other instruments are already at their chilly operating temperatures of 34 to 39 kelvins, but MIRI needs to get all the way down to 7 kelvins. To achieve that, the instrument has a special cryocooler system. “Over the last couple of weeks, the cryocooler has been circulating cold helium gas past the MIRI optical bench, which will help cool it to about 15 kelvins," cryocooler specialists Konstantin Penanen and Bret Naylor at NASA's Jet Propulsion Laboratory wrote. "Soon, the cryocooler is about to experience the most challenging days of its mission. By operating cryogenic valves, the cryocooler will redirect the circulating helium gas and force it through a flow restriction. As the gas expands when exiting the restriction, it becomes colder, and can then bring the MIRI detectors to their cool operating temperature of below 7 kelvins."

Read more
How to watch NASA’s first space tourism launch to the ISS today
The Ax-1 crew heading to the space station on April 6, 2022.

NASA is about to embark on its first space tourism mission to the International Space Station (ISS), and you can watch the entire event as it happens.

Ax-1 Mission | Launch

Read more