Skip to main content

Perseverance rover will soon begin collecting samples from Mars

NASA’s Perseverance Mars rover took a selfie with the Ingenuity helicopter, seen here about 13 feet (3.9 meters) from the rover. This image was taken by the WASTON camera on the rover’s robotic arm on April 6, 2021, the 46th Martian day, or sol, of the mission.
NASA’s Perseverance Mars rover took a selfie with the Ingenuity helicopter, seen here about 13 feet (3.9 meters) from the rover. This image was taken by the WASTON camera on the rover’s robotic arm on April 6, 2021, the 46th Martian day, or sol, of the mission.  NASA/JPL-Caltech/MSSS

It’s been a busy week on Mars, with the arrival of China’s Zhurong rover and it sending its first images back to Earth. And elsewhere, in a different area of the planet, the helicopter Ingenuity is preparing for its sixth flight which aims to be further and faster than its previous trips. But don’t forget about NASA’s two rovers, Perseverance and Curiosity, which are also trundling along doing science work on the red planet.

NASA’s Jet Propulsion Laboratory recently shared an update on what the rovers have been up to, including the plans for the next phase of the Perseverance mission.

Recommended Videos

With the helicopter Ingenuity off exploring on its own, the Perseverance rover has been freed up to perform observations of the martian rock. It recently used its robotic arm to get up close and personal with the Martian surface, and now it has moved onto the collection of samples. This is one of Perseverance’s major goals: To collect samples of Martian rocks and regolith, which will be picked up and returned to Earth in a future mission called Mars Sample Return. Getting these samples back to Earth is necessary so they can be analyzed in more detail than is possible using the limited instruments available on a rover.

The rover is armed with a special system of tubes for the collection of samples, but this is the first time such a system has been used. So it needs to be tested before it can be used, and that’s what Perseverance is gearing up for.

“In order to ensure that we are ready for this first one of a kind leg of collecting samples and preparing them to bring them back to earth we need to ensure that we can safely place and load the robotic arm on the surface of Mars,” explained Perseverance Surface Mission Manager Jessica Samuels. “So we first did this by loading the core drill and pushing against the Rover itself… The next day we successfully demonstrated the capability of placing the core on the surface of Mars.”

In addition, JPL shared that Perseverance has been traveling around the planet and has driven 345 meters so far. Samuels said there would be more traversing in the rover’s future: “Over the next couple of weeks we hope to continue to check out more of our autonomous navigation capabilities and are excited about the hundreds and hundreds of meters ahead.”

Georgina Torbet
Georgina is the Digital Trends space writer, covering human space exploration, planetary science, and cosmology. She…
NASA lost contact with Mars Ingenuity helicopter for a week — but it’s OK now
NASA's Ingenuity helicopter.

NASA has announced that it recently lost contact with the Ingenuity helicopter on Mars for a week. Communications with the helicopter have now been restored, and it will continue exploring Mars's Jezero crater along with the Perseverance rover.

The Ingenuity helicopter has outlasted all expectations, originally designed to make just five flights but completing an incredible 51st flight in April. However, this extended lifespan means that the helicopter has run into problems, particularly when the Martian winter set in and it was difficult for its solar panels to generate enough heat to keep its electronics warm. This means that the helicopter must deal with occasional brownouts of power during the nighttime, which can affect the time at which the helicopter wakes up each morning.

Read more
NASA’s June skywatching tips include Mars in the Beehive
how to photograph perseid meteor shower night sky with

What's Up: June 2023 Skywatching Tips from NASA

NASA is back again with its monthly roundup of what to look out for in the sky over the coming weeks.

Read more
See a 3D view of a martian crater captured by the Perseverance rover
A snippet of the mosaic of Belva Crater taken by the Perseverance rover.

The Jezero crater on Mars, where NASA's Perseverance is currently exploring, is vast at nearly 30 miles across and was likely created by a huge asteroid impact. But there wasn't just one asteroid impact -- it's thought that several asteroids hit the area over millions of years, creating a succession of craters that overlap and fit within each other.

A snippet of the mosaic of Belva Crater taken by the Perseverance rover. NASA/JPL-Caltech/ASU/MSSS

Read more